Advertising Design I (8570) & II (8571)

By studying Corel Draw, Microsoft Office, Micromedia Director, Adobe Reader, Illustrator, Photoshop, and PageMaker, students prepare themselves for the technological advertisements of the future. By the end of this rigorous course, students will have obtained the ability to combine words, graphics, and photography in a display of pizazz in order to produce undeniably poster-worthy advertisements. Students who complete this course are also eligible for the National Occupational Competency Testing Institute Certification Exam.

Automotive Service Technology (Certified) I (8506), II (8507), & III (8508)

 The Auto Service Technology program provides a thorough understanding of automotive fundamentals and the skills needed to inspect, diagnose, repair, and make adjustments in today’s highly sophisticated vehicles. Emphasis will be placed on brakes, suspensions, steering, and engine performance, electrical and electronic systems. Upon completion of the program, students will be able to use technologically advanced tools and electronic service equipment, and use computerized databases as references for technical data. This program is certified by NATE/ASE (National Automotive Teachers Education Foundation and Automotive Service Excellence). Auto Service Technology is a Dual Enrollment class through Virginia Highlands Community College.

Auto Body Technology (Certified) I (8676), II (8677) ,& III (8678) 

The Automotive Body Technology program provides training in collision repair and automotive construction. Frame/wheel alignment, body panel repair, flexible parts repair, and refinishing, fiberglass repair, interior trim and glass replacement. MEG welding, urethane refinishing, base coat/clear coat refinishing, spot and panel repairs, and estimating are emphasized. Upon completion of this program, students will be able to correctly analyze all types of body damage and to restore the vehicles to their original appearance. This program is certified by NATEF/ASE (National Automotive Teachers Education Foundation and Automotive Service Excellence).

 BUILDING TRADES I (8515), II (8516), & III (8517)

            The Building Trades course serves to introduce students to the construction industry. Hands- on practice allows students the opportunity to become familiar with the proper use of hand tools power tools and to learn the fundamental basic skills in carpentry, electrical wiring and plumbing. This course will provide students the opportunity to obtain entry-level job skills in the Building Trades field. Students will become familiar with basic construction and related safety standards. Students will have the opportunity to learn how to: frame floors and walls, cut and shape stock and fastening stock (for example: nails, screws, staples, and other mechanical fasteners), determine materials needed for a project using a blueprint, install electrical wire, switches and receptacles, learn about basic theory and electrical codes, and plumbing including copper and PVC pipe. The students will learn to install water distribution components, waste and soil pipes, shutoff valves, sinks and a water closet. Upon completion of this course students may seek certification through NOCTI.

Computer Network Hardware Operations (CISCO) I (8542) & II (8543)

The networking academy program is a comprehensive four-semester/280 hour course that teaches students to design, build, and maintain computer networks. Students are prepared for the industry certifications: Cisco Certfied Network Associate (CCNA) and Network+. The networking academy program combines lectures and online learning with hands-on laboratory exerc ises in which students apply what they have learned in calss while working on actual networks. CCNa and Network+ certification teset are available upon completion of the four semesters. CISCO Network is a Dual Enrollment course through Virginia Highlands Community College.

Computer Systems Technology I (8622) & II (8623)

This course is a great opportunity to develop the skills necessary to begin a technological career in computers. Students study computer hardware, operating principles, system configuration, operating systems, and troubleshooting concepts in accordance with lab exercises and computer-aided instruction so as to build these necessary skills. By the completion of the course, students will have gained the knowledge of technology needed to build, install, and repair computers.

Criminal Justice I (8702), II (8703), & III (8704)

This course provides a great opportunity to jump-start a career in the justice system. Students study criminal law, judiciary procedure, and criminal capture concepts and are introduced to the technology used by law enforcement to carry these proceedings out. This course also surveys the jurisdiction and organizations of local, state, and federral criminal justice agencies. By the completion of the course, students will have the tools to be able to understand how the judiciary system works, how modern technology is effecting it, and whether or not they would like to pursue a career in criminal law. Upon completion of this course students may seek certification through NOCTI. Criminal Justice is a Dual Enrollment course through Virginia Highlands Community College.

Drafting I (8530), II (8531), & III (8532)

The Drafting course introduces Technical Drafting from the fundamentals through advanced drafting practices. This course teaches lettering, metric construction, technical sketching, orthographic projection, sections, intersections, development, fasteners, theory and applications of dimensioning and tolerance. It includes pictorial drawing and preparation of working and detailed drawing. The CADD portion teaches computer aided drafting concepts and equipment designed to develop a general understanding of components of a typical CADD system and its operation. Second year students also get involved in designing and developing of architectural plans for commericial and residential dwelling. Dual credit is available along with NOCTI certification.

Electricity I (8533), II (8534), & III (8535)

The Electricity class will prepare students for beginning a career in several fields. It encompasses basic electrical theory, fundamental terminology, symbols, diagrams and an understanding of the general practices of electrical safety. Basic electrical theory, power generation and distribution systems, Ohms law study, OSHA, troubleshooting,safety in the electrical industry, installation and design, residential wiring, commercial and industrial wiring are emphasized. Industrial motor control allows the students to design circuits similar to those found in business and industry. Upon completion of this course students may seek certification from NOCTI. Electricity is a Dual Enrollment course through Virginia Highlands Community College.

Jobs for Virginia Graduates (JVG)

Jobs for America's Graduates is a school-to-career program implemented in more than 1000 schools in the United States and the United Kingdom. JAG's missions is to keep young people in school through graduation and provide work-based learning experience that will lead to career advancement opportunities or to enroll in a post secondary institution that leads to a rewarding career. Since it's inception in 1980, JAG has served over 450,000 participants. The JVG program at the William N. Neff Center was established as a result of a successful competitive grant application approved by the Virginia Department of Education.

Licensed Practical Nurse I (8357) & II (8358)

The Practical Nursing class is an eightteen (18) month program. New classes begin at the start of each new school year. The program duration is two (2) academic school years. upon successful completion of the program, students are eligible to take the National Council for Examination in Practical Nursing (NCLEX-PN), enabling the student to practice as a Licensed Practical Nurse. During the Preclinical phase (first nine months), students will attend class for One-half day. During this time the student will learn Personal-Vocational Relationships, Anatomy and Physiology, Nutrition, Pharmacology and basic nursing skills. During the Clinical phase (second year), the student will attend class and clinical for a full day. Clinical experience will be conducted at the Johnson Memorial Hospital. Other facilities may be visited on special occasions. Course work includes Maternal-Child Nursing, Mental Health Nursing, Geriatric Nursing, Medical-Surgical Nursing, Administration of Medications, and Personal-Vocational Relationships that will prepare the student for graduation and the workplace. All students enrolled in the LPN program participate in the Health Occupations Students of America (HOSA) club. Students who successfully complete the program may "bridge" to the registered nursing program at the Virginia Highlands Community College. Adult and High School students must complete an application available through the Guidance Office or the William N. Neff Center office.

Masonry I (8512) & II (8513)

Students will practice laying brick, block, and stone. They will work at mastering the art of using a trowel to spread mortar and to apply mortar to the ends of brick and block. Students will be using hand tools, power tools and equipment applicable to the masonry trade. Upon completion of this course students may seek certification from NOCTI.

Nurse Assistant I (8360) & II (8362)

Nursing Assisant students are taught the basic skills needed for careers in the health care field. During the first semester, students are taught body structure and function, diseases and disorders, nutrition, and medical terminology. instruction in CPR and first aide are included during this time. During the second semester students are prepared to pursue and explore career options. All students ae given the opprotunity to complete the required curriculum for certified nurse assistant and take the state test for certification. Clinical experience in local nursing home, the hospital, and home health are an integral part of the second semester. Studentsin the Nursing Assistant class are members of Health Occupations Students of America (HOSA). Upon successful completion of the program students are eligible to seek certification through the Virginia Board of Nursing.

Pharmacy Technician I (8305) & II (8306)

Pharmacy technicians work in community and hospital pharmacies assisting pharmacists.  This course provides training in basic calculations and other areas to prepare individuals to enter the job market. This class introduces students to variouspharmacy practice settings and covers drug classes, basic physiology, drug interactions, and daily pharmacy operations. This program trains individuals to effectively assist in pharmaceutical preparations and complete daily required tasks in any pharmacy enviornment, although on the job training is still part of pharmacy training. Students in the Pharmacy Technician program are members of the Health Occupations Students of America (HOSA) club. Upon successful completion of the program students are eligible to seek certification through the Virginia Board of Pharmacy by taking the Virginia Pharmacy Technician Examination.

Resource

The Resource Department is designed to improve educational outcomes for all individuals. The resource teacher is an advocate, helps attain self-fulfillment, and promotes meaningful participation in quality education. The resource teacher collaborates with other staff to improve the delivery of instruction on a diverse level.

Robotics I, II & III

This excellent course provides students with the opportunity to use state-of-the-art concepts, applications, and technological research to create robots with uses that range from everyday household chores to military safety. With the assistance of lab exercises and hands-on training, students will build, test, and program small-scale and large-scale robots.

Welding I (8672), II (8673), & III (8674)

The welding program course covers instruction in basic welding, basic oxy-fuel cutting and brazing, welding terms and joints, metal properties and weld defects, basic shielded metal arc welding, basic gas metal arc welding, basic gas tungsten arc welding, blueprint reading, welding symbols, and automated welding. It is expected that a student who completes a two-three year ourse will be able to attain a job as an entry welder. On completion of the required compentencies, students will be given the opprotunity to take the American Welding Society (AWS) certification test.